DRAFT Amendments to working time restrictions for drivers
The Ministry of Transport has proposed to optimize restrictions imposed on the working time of drivers. The amendments are to affect organisations and facilities that employ drivers operating vehicles belonging to such organisations and that are incorporated or registered in Russia.
State environmental inspection will only be investigating grounded environmental complaints made by individuals. The amendment to the procedure for environmental inspection of organisations was introduced by Order No. 101 of 16 March 2016. The amendment provides that a non-scheduled environmental inspection may only be conducted following a complaint of an individual (instead of “an individual or an organization” as before) regarding a breach of his or her lawful rights.
Decision No. 23 of 15 March 2016 of the Eurasian Economic Commission Collegiate sets out the transitional provisions for entering into force of the amendments to the Technical Regulation on the Safety of Perfumery and Cosmetics.
Decree No. 284 of 9 April 2016 sets the rates for product utilization (environmental) charges, within the concept of extended producer responsibility (introduced in 2015). The charges are set in roubles per one tonne, for each of the 36 relevant product groups.
Import of textile machinery requires an expert assessment
Revised guideline for risk assessment of major hazard facilities
Sanitary and hygienic rules and norms adopted during the “Soviet” time will cease to be effective as of 1 January 2017
The timeframe was set for Kyrgyzstan for the entry into force of EEU Technical Regulations. It was adopted by Decision No. 11 of 26 January 2016 of the Eurasian Economic Commission. The TRs will become mandatory in Kyrgyzstan on different dates, and the last one to become mandatory is the TR on automotive and aviation fuel which is to become fully mandatory on 12 August 2021.
The TRs are to be enforced in Kyrgyzstan in four “batches”.
As of 25 January 2017 manufacturers and importers of cosmetic products in the EAEU (the former Customs Union) will have to issue a conformity declaration pursuant to one of the prescribed schemes: 3d, 4d or 6d.
As of 10 February 2016, manufacturers and importers of products that are subject to Technical Regulations, must ensure that the conformity mark placed on such products is in compliance with the requirements pertaining to its form and size as well as the marking rules.
Occupational exposure limits, HS management, health and safety training, H&S management, occupational safety rules
Environmental liability, waste management, air protection, water management, hazardous substances management, dangerous goods transportation, use of chemicals…
Cosmetics, food, electronics, chemicals, clothing, textiles, other consumer goods
the Privacy policy.