As of 17 May 2018, organisations must ensure that their general fire safety instruction complies with the requirements imposed by the adopted regulation.
As of 18 May 2018, facilities performing hot works in temporary locations are required to issue a permit for such works in accordance with the adopted form and pursuant to the adopted Instruction.
Hot works include welding, gas welding and other similar types of work.
As of 18 May 2018, organisations that operate warehouses or storage areas for materials and substances are required to comply with the rules adopted by Instruction on Storing Substances and Materials. The Instruction imposes storage requirements aimed at ensuring fire safety at industrial and other facilities and warehouses.
As of 6 March 2018, a revised list of products subject to compulsory national conformity assessment entered into force. Decree No. 849 dated 21 October 2016 on the list of products subject to compulsory conformity assessment was amended by Decree No. 156 dated February 2018.
Facilities that emit warfarin sodium, biocide manufactured by Nalco Chemicals and / or corrosion or scale inhibitor manufactured by Nalco Chemicals into the ambient air are required to ensure that their emissions of these substances do not result in the exceedance of the set concentration thresholds set for such substances for the air of residential and recreational areas.
As of 1 October 2017, all organisations performing activities that have an impact on the environment are required to comply with the adopted environmental protection rules (the Rules).
The Rules contain environment protection requirements regulating:
As of 1 September 2017, manufacturers and importers of external power supply sources (EPS) are required to perform compulsory energy efficiency certification for these products. As of the same date, manufacturers and importers of as well as single-speed asynchronous (induction) three-phase electric motors are required to issue a declaration of conformity with energy efficiency requirements.
As of 20 September 2017, organisations discharging wastewater into surface water bodies (whether directly or indirectly) will be assigned wastewater discharge limits (including the maximum concentrations of polluting substances) in accordance with the adopted Regulation.
As of 30 July 2017, the national Belarusian conformity mark is to be applied in accordance with the revised procedure.
The manufacturer, its authorised representative or the seller is required to affix the national mark of conformity. The dimensions of the mark are to be determined by the manufacturer, its authorised representative or the seller (i.e. the entity authorised to affix the mark).
The head of the Department of State Supervision and Surveillance of the state standardisation authority (Gosstandart) reported that over 60% of electrical and electronic equipment imported into Belarus are not compliant with the applicable Technical Regulations of the EAEU.
Occupational exposure limits, HS management, health and safety training, H&S management, occupational safety rules
Environmental liability, waste management, air protection, water management, hazardous substances management, dangerous goods transportation, use of chemicals…
Cosmetics, food, electronics, chemicals, clothing, textiles, other consumer goods
the Privacy policy.