Federal Agency on Technical Regulation and Metrology has signed the Order on the application of the national intra-state standard GOST 33984.1-2016 “Lifts. General safety requirements for the design and installation of lifts. Lifts intended for persons or persons and cargo.”
Amended procedure for used oil treatment
The revised version includes mainly drafting amendments and a revised diagram of the movement of used oil from organisations and physical persons to the centralized collection and processing points as well as to the points of used oil exchange.
Manufacturers and importers of medical devices that submit a registration application for these devices after 24 March 2017, have to ensure that their technical documentation contains all required information, as prescribed by the adopted Order No. 11n dated 19 January 2017. This technical documentation is to be submitted as a part of a registration dossier for any medical devices.
As of 18 March 2017 state supervision bodies (inspections) are to be taken risk-oriented approach when performing additional 33 types of supervision. The added types of supervision include environmental, transport, land use, ethanol handling, pharmaceutical handling and some other types of supervision.
As of 6 September 2017 manufacturers, importers and suppliers of telecommunication equipment in Uzbekistan are required to comply with the adopted Technical Regulation on the Safety of Telecommunication Equipment.
The adopted Technical Regulation applies to both new equipment (regardless of the country of manufacture), modernized (refurbished) equipment, used equipment and imported equipment.
On 16 February 2017, the Eurasian Economic Commission Collegiate adopted Decision No. 5 amending the Programme for the Development of Standards to Confirm Compliance with Technical Regulations on Electromagnetic Compatibility of Technical Devices.
Besides a number of editorial changes, the amendments change the beginning and end year of the standards development timeframe and add 36 new standards containing EMC requirements for different types of products.
State labour safety inspection “Sanoatgekontechnazorat” has submitted a number of amendments to the legislation regulating operation of major hazard installations. If adopted, the draft law would require operators of major hazard installations (MHIs) with the number of workers 50 or more, to create special service that would perform self-monitoring of compliance with industrial safety requirements. The service must consist of qualified personnel.
The EurAsian Economic Commission Collegiate approved the list of standards containing rules and methods for testing and measurements for the EEU Technical Regulation in the Requirements for Liquefied Hydrocarbon Gases to be Use as Fuel.
The EurAsian Economic Commission Collegiate approved the extension of transitional period for the EEU Technical Regulation on the Safety of Explosive Substances and Products Made on the Basis of Such Substances in the part regulating labelling of such products and substances. The TR regulates the circulation of explosive products used in coal, petrochemical, gas and some other industries.
The EurAsian Economic Commission Collegiate approved the transitional provisions for the EEU Technical Regulation on the Restriction of Use of Hazardous Substances in Electrical and Electronic Equipment. This Technical Regulation is to enter into force on 1 March 2018. The TR restricts the use of lead, mercury, cadmium and other hazardous substances in a number of products, including domestic appliances, computers, refrigerators, smartphones and some other products.
Occupational exposure limits, HS management, health and safety training, H&S management, occupational safety rules
Environmental liability, waste management, air protection, water management, hazardous substances management, dangerous goods transportation, use of chemicals…
Cosmetics, food, electronics, chemicals, clothing, textiles, other consumer goods
the Privacy policy.