As of 27 August 2017 organisations using in their production process any non-organic acids and alkaline, mercury, plastic, epoxy resins, carcinogens, mutagens, benzene and liquid nitrogen are required to comply with a consolidated set of occupational safety rules.
Draft law on waste electric and electronic equipment was published on 24 May 2017.
If the law (WEEE Law) is adopted by the Parliament (expected in 2017), it would affect manufacturers and distributors of electrical and electronic equipment (EEE).
Manufacturers and importers of television sets will be required to provide consumers with information on energy consumption characteristics of such television sets, when the adopted Technical Regulation (TR) enters into force. It is intended that TR will enter into force six months after its official publication.
As of 1 April 2018 manufacturers and importers of radio-electronic equipment will be required to comply with the adopted Technical Regulation (RE-TR).
As of 30 May 2017, manufacturers and importers of certain types of electrical and electronic equipment (including ICT equipment and domestic appliances) have to comply with the adopted electromagnetic compatibility requirements.
The Cabinet of Ministers of Uzbekistan adopted Decree No. 389 approving Technical Regulation on Electromagnetic Compatibility (the EMC TR) on 21 November 2016.
State Labour Protection Service has issued a reminder that all organisations are required to perform workplace risk assessment (the Attestation of workplaces), in accordance with the procedure adopted by Decree No. 442 of 1 August 1992 and Methodical Recommendations adopted by Decree No. 41 of 1 September 1992.
The Ministry of Natural Resource and the Environment has published a Guidance explaining how extended producer responsibility (EPR) provisions are to be applied.
The head of the Department of State Supervision and Surveillance of the state standardisation authority (Gosstandart) reported that over 60% of electrical and electronic equipment imported into Belarus are not compliant with the applicable Technical Regulations of the EAEU.
The Council of the EurAsian Economic Commission has adopted a decision requiring customs authorities of all EAEU countries to accept certificates (conformity assessment documents) issued in any EAEU Member States.
As of 21 May 2017, manufacturers and importers of packaging are required to comply with the revised Technical Regulation on the Safety of Packaging.
Decision No. 96 of the Council of Eurasian Economic Commission adopted on 18 October 2016 amended Decision No. 769 of 2011 that adopted Technical Regulation on the Safety of Packaging.
Occupational exposure limits, HS management, health and safety training, H&S management, occupational safety rules
Environmental liability, waste management, air protection, water management, hazardous substances management, dangerous goods transportation, use of chemicals…
Cosmetics, food, electronics, chemicals, clothing, textiles, other consumer goods
the Privacy policy.